Gator Pit of Texas Custom BBQ Pits

Pellet and gas Grill Combo

Total Package Price:  $5,695.00


Great for the patio or outdoor kitchen area

Wood smoke meats low and slow and Sear Steaks on a hot gas grill


Photos or videos may show features not standard.


Gator Pit did not invent the wheel.  We just made a better wheel.  That is what our Pellet Cooker is today.  Gator Pit has raised the bar in the Pellet Grill industry with this Gator Pit.  Heavy duty welded construction, thick steel, commercial all-weather casters and more.  Does not arrive in a cardboard box and you will not have to spend hours assembling our Pellet Cooker.  Made in Houston, Texas USA. Arrives ready to fire up and start cooking.  See full description below.


*For more information pertaining to the Hopper and PID controller please visit  Although Gator Pit of Texas is not the manufacturer of the Hopper or controller, our customers do have a one (1) year limited warranty on the Hopper parts and controller that is covered thru Smoke Daddy Inc (SDI).  All customers will receive the full detailed written warranty on the Hopper Assembly when you receive your Gator Pit Pellet Cooker to retain for your records.  All customers will also receive full written Owner’s Manual on the Gator Pit Pellet Cooker.  Rest assured, your Gator Pit is covered.  Hopper components are covered for that one year and your Gator Pit grill is covered under our Limited Life Time Warranty listed on our website.


Standard layout is Pellet Grill left mount side. Gas Grill right mount side. Photo has a reversed layout. ADD $150.00 to reverse layout from standard.


Gator Pellet Grill Smoke section:

Approximately 700 pounds total weight


Lower sliding food rack is approximately 20” x 33”


Upper half pull-out food rack is apprx. 10” x 33”


¼” thick new pipe x 20” Diameter x 36” Long food/smoke chamber


¼” thick end caps or side walls


¼” steel construction allows for better heat retention and less fuel consumption.  This provides a longer burn time at a set cooking temperature


Fully welded door flanges to prevent heat and smoke from escaping the chamber and last-forever stainless steel cool touch handle


One Probe hole/port for wired thermometers Pellet side.  Can run multiple wires thru one Port.


Legs and lower expanded metal storage area are completely welded angle iron


Adjustable flat top stacks with handle. Birdhouse Stacks additional costs.


11 gauge thick removable grease pan for easy clean up


11 gauge thick removable firepot heat shield to assist in spreading heat out


Large 2” grease drain with threaded removable cap on Pellet Grill


Side push/pull handle (stainless steel cool touch handles optional)


Four commercial all-weather heavy duty 2” x 5” casters with grease zerks to lubricate axle and bearings.  2 swivel. 2 rigid (Foot brakes optional)


Gas Grill section:

¼” thick steel x 20” x 24” single door

Propane (LP gas) only

Single temperature gauge

Sliding lower meat rack

Half removable top meat rack

Commercial H-Buner.  Either Cast Iron or Stainless, subject to availability.

¼” thick steel V-Shaped removable heat shield over burner

Single flame control valve

Removable LP tank holder, regulator hose with quick connect (LP tank not included)



Angle framed expanded metal full length shelf


Hopper Description and features:  Manufactured by Smoke Daddy-Pellet Pro


·         *NEW* Larger Hopper Capacity (35lbs Total)

·         *NEW* Pellet Dump for Easy Pellet Removal!

·         *NEW* Hopper Baffling System (Directs pellets into auger more easily)

·         Universal Mounting Capabilities right or left hand application.  Left mount standard.  Right mount ADD $150.00

·         301 Stainless Steel Hopper Lid and Burnpot

·         36,000 BTUs

·         PID controller set in 5 degree increments

·         Temp range: 160°F-450°F.  Individual results may vary.

·         Heavy Duty .52 Amp Auger Motor

·         Upgraded 301 stainless 9-hole burnpot; creates a more efficient burn

·         Combustion fan facilitates a natural convection throughout the grill area

·         Smoke Setting & Grill Setting

·         Improved Hot Rod Design

·         100% Digitally Controlled

·         Easily Mountable/Removable

·         1-Year Smoke Daddy Warranty on Hopper Assembly

·         Requires 110v outlet; ±10%




·         Extra Long 5ft long RTD Probe

·         5ft Meat Probe


Hopper is removable from the smoke chamber


Complete Hopper Instructions

·         Operating Voltage: AC 110V ±10%, 60Hz


The Pellet Pro® True PID Controller


The Pellet Pro® uses a True PID Controller


PID Description Overview


Proportional-Integral-Derivative (PID) control is the most common control algorithm used in industry and has been universally accepted in industrial control. The popularity of PID controllers can be attributed partly to their robust performance in a wide range of operating conditions and partly to their functional simplicity, which allows engineers to operate them in a simple, straightforward manner.


As the name suggests, PID algorithm consists of three basic coefficients; proportional, integral and derivative which are varied to get optimal response. Closed loop systems, the theory of classical PID and the effects of tuning a closed loop control system are discussed in this paper.


If you would like to see the full article click here:




Your Gator Pit Pellet Cooker is tested prior to our customers receiving the unit.  Pellet Pro tests each Hopper Assembly prior to sale.  Gator Pit tests each complete Gator Pit Pellet Cooker prior to leaving our facility.  We ensure all is in working order before our customers receive their GP Pellet Cooker.  Know that when you receive your Pellet and Gas Grill, you can start cooking.



Gator’s CUSTOM PRO SHOP Options Available:  Limited ONLY to the custom options listed below  Due to your Gator’s unique design & customization, lead time will be extended from the standard featured model above.


Birdhouse stacks $99.95 each


Add foot brakes $85.00


304 brushed stainless steel front shelf apprx. 12” x 57” $495.00


Four ½ thick folding D-Rings for anti-theft or safely securing four corners during transport $99.95


Additional Remote thermometer probe holes with removable threaded plugs $39.95 each.


Paper towel hanger on front shelf $39.95


Utensil hanger $15.00 each, fabricated by Gator Pit


Lower cabinet front doors $725.00


Gator Pit BBQ Rubs and Seasoning:  Brisket, Rib, Chicken, Steak, Cajun Season-All.  $7.99 per 7 oz. shaker bottle.  $6.99 per bottle with Gator Pit Smoker or Grill order.





Gator Pit of Texas, LP

11161 West Little York Road

Houston, Texas 77041-5015 USA

Our office hours (Central Time)

Monday thru Friday: 8:00AM to 4:00PM

Saturday and Sunday:Office is closed

Office: 713-896-0144

Toll Free: 1-866-869-5166

Fax: 713-896-8857

 Legal Inquiries pertaining to GATOR PIT of TEXAS, LP. Patents and/or Patents Pending, Registered Names, Trademarks, Copyrights, etc. are to be directed to Doak Proctor, Attorney at Law, Houston, Texas. Gator Pit® is a Registered Trademark with the US Patent and Trademark Office. Content on this website is the sole property of Gator Pit of Texas, LP.

© Copyright 1996-2016. All Rights Reserved.