Author Topic: Ash rake  (Read 2035 times)

0 Members and 1 Guest are viewing this topic.

Offline rtstudio

  • Backyard Classic Chef
  • **
  • Posts: 86
  • 24" BYCC
Ash rake
« on: July 14, 2006, 10:09:23 PM »
Hey Ritch,
  I was looking for a picture of your ash rake but I did't see it anywhere. Can you or anyone else please post a picture of one? Thinking of ordering one.

Thanks,
  RT
24" Backyard Classic Chef

Offline Gator Ritch

  • Administrator
  • Texas Legend
  • *****
  • Posts: 3267
  • Texas Legend by Gator Pit of Texas
    • Gator Pit of Texas, LP
Ash rake
« Reply #1 on: July 15, 2006, 07:56:24 AM »
Don't have photo of just the rake.  There are some pics on my website that have the rake stored on the backside.  Can't really see unless you know what you are looking at.  Maybe some on the forum has a pic or two of theirs.  Basically, it is a 1/2" steel rod welded to a piece of 1/4" thick plate that is cut the radius of the pit pipe or flat if a square firebox.  Insert the rake and pull out all your ash.  Nice, clean, easy.
Ritchey Robin
Pit Designer and Manufacturer
Gator Pit of Texas
11161 West Little York
Houston, Texas 77041
Toll Free: 1-866-869-5166
Website: www.gatorpit.net
Email: info@gatorpit.net
Voted "Best Mobile Barbecue Pit" Houston Pres

Offline Big Smitty

  • Fire Pit
  • *
  • Posts: 42
Ash rake
« Reply #2 on: July 15, 2006, 08:38:19 PM »
I have one of Ritch's ash rakes and it is cool.  Real sturdy, so you can use it to move wood around in the fire box.  The way it is made to fit the contour of the fire box is real nice.  Fits right under the log rack.